HG color enhancer for granite, bluestone and other types of natural stone (product 48) is a professional product that enhances the color of granite and other natural stone and gives it life. This color enhancer also nourishes and protects the natural stone against dirt and stains caused by water or other liquids.
Instructions for use:
Clean the surface , preferably with HG Super Remover.
Leave the surface to dry for three days and then gently apply HG Color Booster with a clean, lint-free cloth.
Treating a large surface? For larger surfaces, apply HG Color Enhancer evenly using a mohair roller and then sand with a clean, lint-free cloth.
After no more than 5 to 10 minutes, the color enhancer will have absorbed into the stone.
p>Remove the excess very carefully using a dry cloth and possibly turpentine.
For very porous surfaces, repeat the treatment until the surface no longer absorbs the color enhancer.
For a glossy surface, after 30 polish the surface for up to 40 minutes.
After 4 hours you can walk on the surface, and after 3 days it can be used again normally.
DANGER H226- Flammable liquid and vapour. H304- May be fatal if swallowed and enters airways. EUH066- Repeated exposure may cause skin dryness or cracking. P101- If medical advice is needed, have product container or label at hand. P102- Keep out of reach of children. P233- Keep container tightly closed P301+P310- IF SWALLOWED: Immediately call a POISON CENTER or doctor/physician. P331- Do NOT induce vomiting. P501- Dispose of contents and container in accordance with all local, regional national and international regulations. Contains: Hydrocarbons, C11-C12, isoalkanes, <2% aromatics
Safety Data Sheet
Ingredients
