Cookie Consent by Free Privacy Policy Generator
HG impregnating protector

HG impregnating protector

Product Code: 506100106
Brand:
More than 10 in stock.
23.29€
Registered users earn 1.16€ bonus money with this purchase

Product Description

HG Natural stone impregnator is a special pre-treatment agent for marble and other natural stones, such as travertine, limestone, sandstone, etc., also suitable for granite and marble composite materials. This unique product penetrates deep into the pores of the stone, preventing its ability to absorb, as well as dirt and (grease) stains from entering the pores of the stone. This product does not contain silicone (allows the floor to "breathe"). It is quick drying and can be used both indoors and outdoors.

Instructions for use.
1.  The surface must be completely free of dirt, dust and grease.
2. The cement/glue and the joints of the new tile floors must be fully cured and dry. Drying time is usually between 4 and 6 weeks.
3. The existing floor surface must be completely dry after cleaning. This process usually takes 3 days. Extra porous tiles such as sandstone will require a longer drying time. We recommend a drying time of at least a week for sandstone. If underfloor heating is on, 24 hours will be the optimal drying time. It should be noted that the underfloor heating must be turned off at least 12 hours before applying the product to the floor surface.
4. The product must be used undiluted and applied evenly in one direction. On high-gloss floors, this product should be applied with a lint-free cloth.
5. If the product has not been absorbed into the floor and is on the natural stone surface 10 minutes after the product has been applied, remove it immediately with a clean, lint-free cloth. cloth. 
6. Second floor treatment is recommended for especially porous tiles. You can apply the second layer 1 hour after the first tile treatment.
7. You can walk on the floor 3 hours after the last floor treatment. The floor is completely protected 12 hours after the last treatment.

Dosage: For especially porous natural stone surfaces: 1 liter per +/- 10-20 m2. For slightly porous and highly polished natural stone surfaces: 1 liter per +/- 20-50 m2

EUH208- Contains Methylisothiazolinone. May produce an allergic reaction. P101- If medical advice is needed, have product container or label at hand. P102- Keep out of reach of children.

Ingredients

Safety Data Sheet

Write a review

Note: HTML is not translated!
    Bad           Good